Sterling Silver Tapered Petal Necklace Project

 
Tapered Petal Choker
Tapered Petal Choker Project

The next project from my class was a Tapered Petal Choker necklace.  This piece was quite a bit more challenging than the earrings, especially for my current metalsmith capabilities. 

The components for the necklace are 5 pieces of 10 gage round sterling silver wire (1-40mm piece, 2-35mm pieces, and 2-30mm pieces), 16 gage round sterling silver wire about 19″ long,  and 4 10mm glass beads.

The first step was to take the 5 pieces of 10 gage wire and make the tapered petals of the choker.  The instructor made it look so easy in his demonstration but it certainly was not as easy as it looked. 

I started with the center petal. The goal was to flatten half the lenth of the wire using a sweeping hammer motion.  This was a little trickly at first but I eventually got the hang of it.  After the first half was flattened, the petal was turned 90 degrees and the other half was flattend.  One the pice was flattened on both ends.  The piece was filed.  The instructor gave us the choice to file to a blunt straight edge or a round rounded edge.  I decided to to the rounded edge. I thought it would give it a more finished look.  After it was filed, a hole was drilled at on end to slip over the choker wire.   I finished the other four petals in the same way. 

The final step was to place the beads and tapered petal on the 16 gage wire and add a simple eye and hook on the end of the wire.

The smallest petals have the cleanest look, my rythym and technique seemed to improve as I completed the each petal.  Take a look at the blow up of the centerpiece and you can see what I am talking about.

Tapered Petal Choker Center Piece

Tapered Petal Choker Center Piece

What I learned from this project:

  • I really underestimated drilling the hole.  On the first petal I just thought I could “eyeball” the location of the hole, bad idea!  With the other petals, I used the centerpunch to mark my drill hole.  It went much better on the other petals.
  • The technique to flattend and flare metal wire (I hade tried it few times on my own but just couldn’t get it to work).
  • Use a centerpunch to mark your drilling hole.
  • How to drilling with a flex tool.

This was a really fun project, but a lot of hard work.  I have a lot of practicing to get this skill set down but I am really excited about all this.

The final projects were two sterling silver bracelets……

Advertisements

2 Responses

  1. Hey, great post. Great blog. It is clean and to the point. You know it is rare to find quality content on these things… I am quite impressed with your writing, and was wondering if you might be interested in doing some writing for us on the side. It pays decent.

    If you are interested, we are paying $25-$50+ an hour. Swing by and see us.

    Writers Wanted

    Take care!

  2. Thanks for putting so much effort into this blog. It is looking good.
    Although, I noticed you don’t rank very high in Google.
    Maybe you need to optimize your blog to increase search engine rankings.
    Here is a WordPress Plugin that will get you to the top of Google.

    SEOPressor
    Try it!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: